Shanghai Fluorochem Industry Co.,Ltd
+86 21 5651 1032

Products

Polyvinylidene Fluoride

PVDF Li-Battery Grade-Powder

PVDF Li-Battery Grade-Powder

Safety precautions The homopolymer of vinylidene fluoride (VQF) begin to have a slight decomposition with HF gas released above300°C. Avoid processing or using the products at the temperature above 370°C in order to prevent toxic gas release Workers should avoid breathing in harmful gases during...

Products Details

Performance

Testing Standard

Testing condition

Unit

Indices

Rotational viscosity

Rotational viscometer

0.1g/g NMP

mPa*S

200-400

MFR

ASTM D1238, GB/T 3682

230°C. 12.5kg

g/10min

1.0-6,0

Standard specific gravity

ASTM D792, GB/T 1033.1

Testing temperature: 23°C

/

1.76-1.77

Melting point

ASTM D3418

Secondary melting point

°C

162-170

Water content

Drying weight-loss method

140°C/4h

%

≤0,10

Dissolubility

The solution should be unmuddy, clear, transparent colorless or a little yellow- colored. There should be no impurity or insoluble matters in it.

Method of forming

Dissolve

Fundamental uses

Lithium battery adhesive

Characteristics

Powder with low melt flow rate.

Safety precautions

The homopolymer of vinylidene fluoride (VQF) begin to have a slight decomposition with HF gas released above300°C. Avoid processing or using the products at the temperature above 370°C in order to prevent toxic gas release

Workers should avoid breathing in harmful gases during processing and wear necessary labor protection stuff.

Keep the dust away from being breathed in nasal cavity and infecting eyes.

After production, have a complete clean up of faces and hands.

Disposal of the wastes produced in the processing must be dealt with by specialized personnel for waste disposal and should be conducted according to waste regulations in relevant countries, regions and local places,

Before processing, please read the safety data sheet carefully.

Storage and disposal

The products should be stored in clean, cool, shady, and dry warehouses so as to avoid the mix with dust and moisture. During transportation, violent vibration must be avoided. Prevent any cases aggregation

Packing

FP-818 is packed and sealed in double layer polyethylene plastic bags and then put into hard cardboard bucket. 

Net weight per bucket: 20kg


Hot Tags: pvdf li-battery grade-powder, China, manufacturers, suppliers, factory, wholesale, buy, cheap, price, best, high-quality, for sale
Feedback
Feedback
Contact Us
Address: Room J, 2nd Floor, No.16, Lane 727 Fuping Road, Putuo Dist, Shanghai 200333, China
Tel: +86 21 5651 1032
Fax: +86 21 5651 1032
E-mail:info@haiflon.com
Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML